Show me your kettles

For technical tips, questions etc. on all subjects except Engines and Boilers.
dhic001
Full Steam Ahead
Full Steam Ahead
Posts: 173
Joined: Thu Jun 10, 2010 8:32 am
Boat Name: S.S. Zeltic

Re: Show me your kettles

Post by dhic001 »

I haven't got around to taking pictures of Zeltic's kettle yet, but it is as described above, a coil that the pot is lifted onto. In Zeltic's case the pot is a small stainless coffee pot that holds two cup fulls of water. It'll boil in 6 seconds, but its best to take 12 seconds, otherwise the water jumps out of the pot! It is hidden out of sioght in the side of the boiler room, so looks aren't an issue.

If I were building a larger more permenant kettle that was on display, i'd be inclined to lag and clad it with varnished wooden strips and brass bands like a small boiler. The other option would be a stainless pot, but heated with a gas torch until it went either gold or copper in colour, neither of which would need polishing. Zeltic's cylinder cover is stainless, but heated until it went gold coloured. Unfortunately it got heated a little too much, so ended up colling to copper colour. Ever so often it gets wiped down with a damp rag, and almost 20 years after it was done, it still looks like copper, but has never been polished.

Daniel
User avatar
Lopez Mike
Full Steam Ahead
Full Steam Ahead
Posts: 1930
Joined: Wed Dec 07, 2011 6:41 am
Boat Name: S.L. Spiffy
Location: Lopez Island, Washington State, USA

Re: Show me your kettles

Post by Lopez Mike »

Walked into a swap meet and there it was. For $20USD.

Now the rest of the boat (and me!) will look sooo shoddy.

Image
Attachments
IMG_1950.jpeg
IMG_1950.jpeg (43.98 KiB) Viewed 486 times
If you think you are too small to make a difference, try sleeping with a mosquito.
Dalai Lama
User avatar
TahoeSteam
Full Steam Ahead
Full Steam Ahead
Posts: 865
Joined: Fri Mar 07, 2014 5:38 am
Boat Name: Wayward Belle
Location: South Lake Tahoe, CA, USA
Contact:

Re: Show me your kettles

Post by TahoeSteam »

Now that will be quite nice Mike!
User avatar
RNoe
Full Steam Ahead
Full Steam Ahead
Posts: 268
Joined: Sun May 26, 2019 5:29 pm
Boat Name: Cluaran
Location: Northern Oregon, USA

Re: Show me your kettles

Post by RNoe »

Mike:
I didn't know your boat had 120 VAC onboard.
Amazing...
RussN
User avatar
Lopez Mike
Full Steam Ahead
Full Steam Ahead
Posts: 1930
Joined: Wed Dec 07, 2011 6:41 am
Boat Name: S.L. Spiffy
Location: Lopez Island, Washington State, USA

Re: Show me your kettles

Post by Lopez Mike »

I haven't approached it with tools as yet but i have hopes that the heating element is removable.

As to having loose electrons running about the boat, I'm in the process of acquiring a Stuart Sirius 1" x 1" twin to be rigged out with a very small alternator. Thought being that something better than my existing dry cell powered running lights would be a good idea.

The trick is to find places up under the deck to hide various abominations as batteries and inverters.

Also, on the horizon is a Paul Breight steam driven reciprocating feed water pump. About half done. Not really needed as my existing Hypro and hand pump are doing fine. But the idea of having gadgets to amaze onlookers is irresistible. Sirius whirring and pump chuffing. Why leave the dock?
If you think you are too small to make a difference, try sleeping with a mosquito.
Dalai Lama
User avatar
RNoe
Full Steam Ahead
Full Steam Ahead
Posts: 268
Joined: Sun May 26, 2019 5:29 pm
Boat Name: Cluaran
Location: Northern Oregon, USA

Re: Show me your kettles

Post by RNoe »

Mike: Sounds like "accessory fun."
On that line of thinking I have a 75% completed Cole's Power Models mini duplex steam powered water pump.
It is 6" long and I've watched several videos of them installed and working. Even found one installed in a Blackstaffe power plant like mine!
Gotta git 'er done.
Russ
Post Reply