Re: Hand Pump Design/drawings
Posted: Fri Aug 21, 2026 3:00 pm
Hi Pete,
there is also a very fine Feed water hand pump designed by David King.
I will build my pump according to this design. For the individual parts, I will use gunmetal plumbing fittings. The basic specifications are as follows:
- Bore 26 mm,
- Stroke 90 mm.
----
Dietrich
there is also a very fine Feed water hand pump designed by David King.
I will build my pump according to this design. For the individual parts, I will use gunmetal plumbing fittings. The basic specifications are as follows:
- Bore 26 mm,
- Stroke 90 mm.
- 3D-CAD Rendering
- HaPu01_032.jpg (30.18 KiB) Viewed 138 times
----
Dietrich