Newbie with just an Engine
-
- Full Steam Ahead
- Posts: 936
- Joined: Sat Aug 13, 2011 6:41 pm
- Boat Name: B.N.Y.S.
- Location: Middle Earth
Re: Newbie with just an Engine
I don't think there is any bar on which SBA region you want to affiliate to, so more than one is probably fine.
Retirement is about doing what floats your boat!
A BODGE : - A Bit Of Damn Good Engineering.
A BODGE : - A Bit Of Damn Good Engineering.
-
- Full Steam Ahead
- Posts: 179
- Joined: Sun Jun 05, 2011 7:08 am
- Boat Name: Blue Buccaneer
- Location: Wallasey
Re: Newbie with just an Engine
Hi Nick
In the SBA members section of the website there is a prime and second area you can link too. If you want there is nothing to stop you from contacting the areas reps of the other areas to get on any mailing lists or event lists they may keep.
Mike
In the SBA members section of the website there is a prime and second area you can link too. If you want there is nothing to stop you from contacting the areas reps of the other areas to get on any mailing lists or event lists they may keep.
Mike
Mike Cole
-
- Just Starting Out
- Posts: 11
- Joined: Mon Nov 28, 2016 9:29 am
- Boat Name: No Boat Yet
- Location: North Wales
Re: Newbie with just an Engine
Thanks Mikes, both
Having looked in the SBA members area it would seem my postcode is classed as West Midlands. I have made W Midlands my main region, with Wales secondary. Reversing the original order. An email is on its way to Stephen Milns.
Nick C
Having looked in the SBA members area it would seem my postcode is classed as West Midlands. I have made W Midlands my main region, with Wales secondary. Reversing the original order. An email is on its way to Stephen Milns.
Nick C
- PeteThePen1
- Full Steam Ahead
- Posts: 553
- Joined: Thu Nov 19, 2009 11:53 pm
- Location: Aberystwyth, Wales, Europe
- Contact:
Re: Newbie with just an Engine
Hi Nick
A belated welcome from Wildest Cheshire.
Given that you have an engine, you may want a guide to building the boat, etc. In that case you may enjoy the series in Steamboating Magazine by Chris Doughty on the building of 'Maid of Scrap'. The relevant back issues are available from the Editor, Ron Fossum, another esteemed member of the Forum, so you can make contact by PM.
The only down side is the Brexit Premium which makes the cost in Dollars a bit more than one would wish. However it is our hobby and it will still cost you less than a night out in London so it is worth the price.
Regards
Pete
A belated welcome from Wildest Cheshire.
Given that you have an engine, you may want a guide to building the boat, etc. In that case you may enjoy the series in Steamboating Magazine by Chris Doughty on the building of 'Maid of Scrap'. The relevant back issues are available from the Editor, Ron Fossum, another esteemed member of the Forum, so you can make contact by PM.
The only down side is the Brexit Premium which makes the cost in Dollars a bit more than one would wish. However it is our hobby and it will still cost you less than a night out in London so it is worth the price.
Regards
Pete