Hello
a friend of mine from Sweden is trying to register to the forum, hereafter see what he write to me
" I have tried to register but at the end of the registration form there is a strange question which I must answer. I do not understand this question. Given x = 4, work out x square .... Do you know what they mean with work out??? The answer is not 8 as far as I understand."
The answer seems not to be 16 neither, could you tell me what kind of computation should be done?
After I think we will be able to do it
I do not remember to have this question when I registered
Best regards
Midship
registration process
- Midship
- Lighting the Boiler
- Posts: 23
- Joined: Thu Mar 10, 2011 12:52 pm
- Boat Name: No Boat Yet
- Location: Versailles France
- Contact:
registration process
Midship
Mahogany clinker hull, 18 ft, Blackstaff boiler, Stuart 6A,
http://www.midship22.blogspot.com
Mahogany clinker hull, 18 ft, Blackstaff boiler, Stuart 6A,
http://www.midship22.blogspot.com
-
- Full Steam Ahead
- Posts: 179
- Joined: Sun Jun 05, 2011 7:08 am
- Boat Name: Blue Buccaneer
- Location: Wallasey
Re: registration process
Yes i Had this same problem as well. The question was if I remember correctly, What is 4 Squared.
As I took applied maths at college ( Naval Architecture) i was most put out to be told i had input the wrong answer . I posted on the SBA forum and I then received a email saying I had been accepted.
Mike
As I took applied maths at college ( Naval Architecture) i was most put out to be told i had input the wrong answer . I posted on the SBA forum and I then received a email saying I had been accepted.
Mike
Mike Cole
-
- Full Steam Ahead
- Posts: 936
- Joined: Sat Aug 13, 2011 6:41 pm
- Boat Name: B.N.Y.S.
- Location: Middle Earth
Re: registration process
I'm no great mathamatician, but I'm sure that the question could be worded better. I tried writing the answer and got refused. Had I got the answer wrong??? So I tried the others and got locked out. I had the answer right.........just it wanted numbers.!?!?!?!
Retirement is about doing what floats your boat!
A BODGE : - A Bit Of Damn Good Engineering.
A BODGE : - A Bit Of Damn Good Engineering.