Hello from Minnesota

Read this first then introduce yourself here.
RGSP
Full Steam Ahead
Full Steam Ahead
Posts: 246
Joined: Mon Dec 14, 2015 2:12 pm
Boat Name: Platypus, Shelduck
Location: Very eastern England

Re: Hello from Minnesota

Post by RGSP » Mon May 29, 2017 11:04 am

Welcome to the forum Will. Remember that none of us has all the definitive answers on how to make steamboats or their models, and lots of different ways will be perfectly satisfactory, particularly at model scale.

This web site might give you some ideas, and maybe your local library could get Paul Fisher's manual on model boat building.
http://www.makeamodelboat.com
Mike Rometer
Full Steam Ahead
Full Steam Ahead
Posts: 936
Joined: Sat Aug 13, 2011 6:41 pm
Boat Name: B.N.Y.S.
Location: Middle Earth

Re: Hello from Minnesota

Post by Mike Rometer » Mon May 29, 2017 3:04 pm

Just like big boats, marine ply! Most modelling shop carry the thinner sections.
Retirement is about doing what floats your boat!

A BODGE : - A Bit Of Damn Good Engineering.
Will Creighton
Just Starting Out
Just Starting Out
Posts: 15
Joined: Thu May 25, 2017 3:24 am
Boat Name: No Boat Yet

Re: Hello from Minnesota

Post by Will Creighton » Mon May 29, 2017 9:12 pm

Thanks everyone,
I guess I will just start messing around with different things to get the feel of it. I think the wood route will be better for me than fiberglass.
Will
User avatar
DetroiTug
Full Steam Ahead
Full Steam Ahead
Posts: 1863
Joined: Fri Nov 27, 2009 5:56 pm
Boat Name: Iron Chief
Location: Northwest Detroit

Re: Hello from Minnesota

Post by DetroiTug » Mon May 29, 2017 10:00 pm

Get a sheet of "doorskin" from the lumberyard. Strong, cheap and plenty to work with.
User avatar
cyberbadger
Full Steam Ahead
Full Steam Ahead
Posts: 1123
Joined: Thu Nov 07, 2013 9:16 pm
Boat Name: SL Nyitra
Location: Northeast Ohio, USA

Re: Hello from Minnesota

Post by cyberbadger » Tue May 30, 2017 1:11 am

Welcome Will!

I like Minnesota because my boiler was made there. Jeff Lund, LundMachineWorks in New Ulm.

-CB
Will Creighton
Just Starting Out
Just Starting Out
Posts: 15
Joined: Thu May 25, 2017 3:24 am
Boat Name: No Boat Yet

Re: Hello from Minnesota

Post by Will Creighton » Tue May 30, 2017 2:00 am

Thanks CB,
Yes, Jeff does great work! Have you ever heard of Lawrence Swanz? He's a boiler maker in MN and does great work also.
Will
User avatar
fredrosse
Full Steam Ahead
Full Steam Ahead
Posts: 1906
Joined: Fri Nov 20, 2009 5:34 am
Boat Name: Margaret S.
Location: Phila PA USA
Contact:

Re: Hello from Minnesota

Post by fredrosse » Wed May 31, 2017 8:04 pm

Another modeling option, strip planking. This method is used often to make light weight canoes and kayaks, thin wood strips, fiberglass cloth covering, makes for an excellent steamboat model. The pictures below show a 6 foot long steamboat model I made with these materials for the John Fitch Museum. John Fitch built the first steamboat in regular commercial service, Philadelphia PA, 1790, 17 years before Fulton.
Attachments
FitchHullInterior.jpg
Interior of Fitch Hull
FitchHullInterior.jpg (20.8 KiB) Viewed 7448 times
Fitch-FiberglassCloth.jpg
Hull covered with fiberglass cloth & resin
Fitch-FiberglassCloth.jpg (18.8 KiB) Viewed 7448 times
StripPlankHull.jpg
Thin strips nailed to wood frames, 1/4 inch thick soft wood
StripPlankHull.jpg (35.77 KiB) Viewed 7448 times
Will Creighton
Just Starting Out
Just Starting Out
Posts: 15
Joined: Thu May 25, 2017 3:24 am
Boat Name: No Boat Yet

Re: Hello from Minnesota

Post by Will Creighton » Thu Jun 01, 2017 1:36 am

Thanks for that info!
I have started building a little hull built from a balsa wood frame and sheet wood planking. It's small, but I thought it would be good to start with. After I complete this hull I will hopefully go on to build a bigger one for my actual steamboat, one that's big enough to hold my steam plant.
Will
Post Reply