Engine wanted-UK
-
- Full Steam Ahead
- Posts: 154
- Joined: Wed Jan 11, 2017 12:30 pm
- Boat Name: Isambard
- Location: Calstock, Cornwall, UK
Engine wanted-UK
Good day folks.
I'm just in the early days of putting together my next project.
I've decided upon the boat to build, a 15ft, 6ft beam open launch.
I've probably sourced a boiler which has the capacity to cope with any suitable engine I fit.
All I need to do is decide upon and locate a suitable engine.
At this stage I'm open to suggestions, however it will need to be a ready built model as I'll have enough on my plate building the boat and finishing the boiler.
I won't be able to firm anything up in a hurry as I'm in Nepal until early April and will have limited access to the internet.
Not the best of plans, but there you go !
Regards
Ian
I'm just in the early days of putting together my next project.
I've decided upon the boat to build, a 15ft, 6ft beam open launch.
I've probably sourced a boiler which has the capacity to cope with any suitable engine I fit.
All I need to do is decide upon and locate a suitable engine.
At this stage I'm open to suggestions, however it will need to be a ready built model as I'll have enough on my plate building the boat and finishing the boiler.
I won't be able to firm anything up in a hurry as I'm in Nepal until early April and will have limited access to the internet.
Not the best of plans, but there you go !
Regards
Ian
-
- Full Steam Ahead
- Posts: 936
- Joined: Sat Aug 13, 2011 6:41 pm
- Boat Name: B.N.Y.S.
- Location: Middle Earth
Re: Engine wanted-UK
Ian, I've now tested that hybrid 5A on steam and it runs like a dream (both ways). Incidentally I didn't mention that it came from Cyril Taylor's estate.
Retirement is about doing what floats your boat!
A BODGE : - A Bit Of Damn Good Engineering.
A BODGE : - A Bit Of Damn Good Engineering.
-
- Full Steam Ahead
- Posts: 154
- Joined: Wed Jan 11, 2017 12:30 pm
- Boat Name: Isambard
- Location: Calstock, Cornwall, UK
Re: Engine wanted-UK
Thanks for that update.
Can you PM if you wish to sell it with details of what you're asking and where it is located.
Best wishes from a sunny Nepal !
Can you PM if you wish to sell it with details of what you're asking and where it is located.
Best wishes from a sunny Nepal !
Mike Rometer wrote:Ian, I've now tested that hybrid 5A on steam and it runs like a dream (both ways). Incidentally I didn't mention that it came from Cyril Taylor's estate.
-
- Full Steam Ahead
- Posts: 154
- Joined: Wed Jan 11, 2017 12:30 pm
- Boat Name: Isambard
- Location: Calstock, Cornwall, UK
Re: Engine wanted-UK
I haven't got the boiler yet, but I'm in contact with the seller of the part built Two drum water tube steam boiler on the SBA small ads.
If we can put a deal together I'd be happy with that one.
If you are thinking of selling your 5a I could well be interested.
Internet is slow and irregular here, so limited access.
Regards
Ian
If we can put a deal together I'd be happy with that one.
If you are thinking of selling your 5a I could well be interested.
Internet is slow and irregular here, so limited access.
Regards
Ian
Mike Cole wrote:Which boiler did you end up getting? was it the WTB1?
-
- Full Steam Ahead
- Posts: 179
- Joined: Sun Jun 05, 2011 7:08 am
- Boat Name: Blue Buccaneer
- Location: Wallasey
Re: Engine wanted-UK
Ah good, that two drum on the SBA site is called a WTB1. I have one . ST5 turn up on ebay every so often. The SBA AGM normally has at least one engine for sale. sometimes at rock bottom prices. But look at other types of engines as well , such at the Taylor .
Mike Cole
-
- Full Steam Ahead
- Posts: 154
- Joined: Wed Jan 11, 2017 12:30 pm
- Boat Name: Isambard
- Location: Calstock, Cornwall, UK
Re: Engine wanted-UK
Still on the lookout.
Boiler now sorted
Boiler now sorted
-
- Full Steam Ahead
- Posts: 936
- Joined: Sat Aug 13, 2011 6:41 pm
- Boat Name: B.N.Y.S.
- Location: Middle Earth
Re: Engine wanted-UK
Sorry Ian, I missed you two P.M.s.
I have now replied.
I have now replied.
Retirement is about doing what floats your boat!
A BODGE : - A Bit Of Damn Good Engineering.
A BODGE : - A Bit Of Damn Good Engineering.