A special section just for steam engines and boilers, as without these you may as well fit a sail.
-
dampfspieler
- Full Steam Ahead
- Posts: 254
- Joined: Wed Nov 18, 2009 6:59 am
- Boat Name: No Boat Yet
- Location: Neubrandenburg, Germany
-
Contact:
Post
by dampfspieler » Sun Jan 21, 2024 10:13 am
Hi,
looks interesting.
... The Linux CNC program is already installed on this machine? it is simple and I can learn it quickly.
Which CNC-program do you use?
Best
Dietrich
-
Freezerrr12
- Warming the Engine
- Posts: 99
- Joined: Tue Aug 25, 2020 6:36 pm
- Boat Name: Anastasia
Post
by Freezerrr12 » Thu Jan 25, 2024 6:32 pm
Dear Dietrich! The machine> as I said has the Linux CNC program installed. The operation of the machine is based on sample "G-code" commands. The are in the instructions> which I have in Russian (t's easier fo me). A photo of these instructions, are attached.
-
Attachments
-
- IMG_8858.jpg (162.17 KiB) Viewed 1230 times
-
- IMG_8856.jpg (194.04 KiB) Viewed 1230 times
-
Freezerrr12
- Warming the Engine
- Posts: 99
- Joined: Tue Aug 25, 2020 6:36 pm
- Boat Name: Anastasia
Post
by Freezerrr12 » Thu Jan 25, 2024 6:43 pm
You can give a command using the keyboard and mouse. Bat very carefully. I have already broken a lot of tools (mills and drills) before I learned how to do basic work. Ingvar.
-
Attachments
-
-
- IMG_8862.jpg (181.5 KiB) Viewed 1229 times
-
-
Freezerrr12
- Warming the Engine
- Posts: 99
- Joined: Tue Aug 25, 2020 6:36 pm
- Boat Name: Anastasia
Post
by Freezerrr12 » Mon May 06, 2024 10:06 pm
Hello to all forum participants. Summer has arrived in the North Caucasus. With the onset warmer, I made a new valve fo the high pressure cylinder. i had use high temperature soldering and torch with acetylene/
-
Attachments
-
- IMG_9042.jpg (137.38 KiB) Viewed 270 times
-
- IMG_9040.jpg (132.78 KiB) Viewed 270 times
-
-
Freezerrr12
- Warming the Engine
- Posts: 99
- Joined: Tue Aug 25, 2020 6:36 pm
- Boat Name: Anastasia
Post
by Freezerrr12 » Mon May 06, 2024 10:11 pm
Here is what i got/
-
Attachments
-
-
-
- IMG_9043.jpg (124.67 KiB) Viewed 264 times
-
Freezerrr12
- Warming the Engine
- Posts: 99
- Joined: Tue Aug 25, 2020 6:36 pm
- Boat Name: Anastasia
Post
by Freezerrr12 » Mon May 06, 2024 10:27 pm
I am not such a great specialist in this matte as Dietrich,but the valve as a whole turned out well. I am happy to admit that Dietrich -Dampfspieler makes a high quality product. without using such large machines as a mine.
-
Attachments
-
- IMG_9078.jpg (157.81 KiB) Viewed 256 times
-
TahoeSteam
- Full Steam Ahead
- Posts: 814
- Joined: Fri Mar 07, 2014 5:38 am
- Boat Name: Wayward Belle
- Location: South Lake Tahoe, CA, USA
-
Contact:
Post
by TahoeSteam » Mon May 13, 2024 12:54 am
Looking like it is coming along nicely! I really like how you fabricated the valve spool.