Good day,
I am planning on creating two Southworth 12" vertical steam pumps, with the intent to sell one.
Currently, however, I have no indication of the sell value of it and I was wondering if someone here does. If someone is interested in buying/commission one (when it is done, I shall create a new topic with pictures and description) then I would love to get into contact with them.
Furthermore, I am curious what material is recommended for the cylinder; cast iron or gun metal?
Thank you in advance.
With kind regards,
Han Smit
Southworth 12 inch vertical steam pump
- cyberbadger
- Full Steam Ahead
- Posts: 1123
- Joined: Thu Nov 07, 2013 9:16 pm
- Boat Name: SL Nyitra
- Location: Northeast Ohio, USA
Re: Southworth 12 inch vertical steam pump
For reference the casting cost:
12″ Vertical £295.00 8kg Post and Packing UK £18.00 without Bar Stock (Total £313.00 or currently about $413)
Those are definitely a desirable size and I have heard good things about Southworth.
For your time I wouldn't ask less then $800, and I think you could probably get much more on ebay to be honest. (Please do not take offense if you think that is too low!)
I would go with the bronze for corrosion reasons probably, although the pistons?
-CB
12″ Vertical £295.00 8kg Post and Packing UK £18.00 without Bar Stock (Total £313.00 or currently about $413)
Those are definitely a desirable size and I have heard good things about Southworth.
For your time I wouldn't ask less then $800, and I think you could probably get much more on ebay to be honest. (Please do not take offense if you think that is too low!)
I would go with the bronze for corrosion reasons probably, although the pistons?
-CB
-
- Full Steam Ahead
- Posts: 179
- Joined: Sun Jun 05, 2011 7:08 am
- Boat Name: Blue Buccaneer
- Location: Wallasey
Re: Southworth 12 inch vertical steam pump
As the cost of either bronze or cast iron is the same I would prefer bronze cylinders.
I am half way into building the 6 inch pump, I wish now I went for the 12 inch.
I am half way into building the 6 inch pump, I wish now I went for the 12 inch.
Mike Cole
-
- Full Steam Ahead
- Posts: 936
- Joined: Sat Aug 13, 2011 6:41 pm
- Boat Name: B.N.Y.S.
- Location: Middle Earth
Re: Southworth 12 inch vertical steam pump
I'm part way through a 6" horizontal, which are bronze.
Retirement is about doing what floats your boat!
A BODGE : - A Bit Of Damn Good Engineering.
A BODGE : - A Bit Of Damn Good Engineering.