Patchett engine
-
- Just Starting Out
- Posts: 6
- Joined: Mon Sep 05, 2016 3:57 pm
- Boat Name: MAGIC
Patchett engine
HI, new to the forum. I have been involved with steam all my life, stationary, locomotive, and marine. I have my own launch 23' with a 1882, T Patchett Compound Built In Stoneham Massachusetts. Which brings me to the forum. I know there is one more Patchett in existence. It was a 45 Hp compound that was once owned by Fred simple of the Simple engine company. It was in his personal collection. I would like to find the whereabouts of this engine. If anyone has any knowledge of this engine I would like to here from you.
Thank you, Bob
Thank you, Bob
- DetroiTug
- Full Steam Ahead
- Posts: 1863
- Joined: Fri Nov 27, 2009 5:56 pm
- Boat Name: Iron Chief
- Location: Northwest Detroit
Re: Patchett engine
Hi Bob,
Welcome to the forum.
Sounds like an interesting engine you have, hoping you can post pictures of it at some point.
-Ron
Welcome to the forum.
Sounds like an interesting engine you have, hoping you can post pictures of it at some point.
-Ron
-
- Steam on Deck
- Posts: 54
- Joined: Wed Apr 10, 2013 7:27 pm
- Boat Name: Catawissa
- Location: Sweetwater, New Jersey
Re: Patchett engine
Bob,
I believe the engine you seek is in the possession of Dave Thompson. Dave runs the Lee's Mill Steamboat Meet on Lake Winnepesaukee. I am , in fact there (here), even as we sort of speak. If you were to come by in the next week you would see lots of steam boats and Dave would probably be glad to show you the Patchett engine.
Happy steaming, best regards, Steamboat Mike and the good boat Catawissa.
I believe the engine you seek is in the possession of Dave Thompson. Dave runs the Lee's Mill Steamboat Meet on Lake Winnepesaukee. I am , in fact there (here), even as we sort of speak. If you were to come by in the next week you would see lots of steam boats and Dave would probably be glad to show you the Patchett engine.
Happy steaming, best regards, Steamboat Mike and the good boat Catawissa.
-
- Just Starting Out
- Posts: 6
- Joined: Mon Sep 05, 2016 3:57 pm
- Boat Name: MAGIC
Re: Patchett engine
Mike, Thank you for the info. If you would pass my contact info on to Dave I would like to correspond with him about the engine. Actually I would like to acquire the engine and put it in a boat I'm building. The Patchett I have is a beautiful running engine. The hull I'm starting will be 40' long and only 6' beam with a very flat run aft. I have a Sissons triple I could use however it was designed to be non condensing and the expansion ratios of the cylinders do not work well with condensing here in the salt chuck. My brother has a Fitz Henry compound that is almost Identical to the Patchett. Fitz Henry was the lead engineer for Patchett and quit and built his own engine. Dave could email me here or my work email of bob@everettengineering.com or phone me at 425-418-7055. Again thank you for the reply.
- TahoeSteam
- Full Steam Ahead
- Posts: 813
- Joined: Fri Mar 07, 2014 5:38 am
- Boat Name: Wayward Belle
- Location: South Lake Tahoe, CA, USA
- Contact:
Re: Patchett engine
Welcome to the forum Mr. Desert
~Wesley Harcourt~
https://www.youtube.com/c/wesleyharcourtsteamandmore
https://www.youtube.com/c/wesleyharcourtsteamandmore
-
- Just Starting Out
- Posts: 6
- Joined: Mon Sep 05, 2016 3:57 pm
- Boat Name: MAGIC
Re: Patchett engine
Wesley, good to hear from you. Has your Dad splashed that boat in the water Yet? Watched your videos, looks awesome.
- TahoeSteam
- Full Steam Ahead
- Posts: 813
- Joined: Fri Mar 07, 2014 5:38 am
- Boat Name: Wayward Belle
- Location: South Lake Tahoe, CA, USA
- Contact:
Re: Patchett engine
Good to hear from you as well.. Not yet. He just officially received the paperwork from the USCG and CA DMV this week. Not in time for the B&W meet.. Will you be attending this year?
~Wesley Harcourt~
https://www.youtube.com/c/wesleyharcourtsteamandmore
https://www.youtube.com/c/wesleyharcourtsteamandmore
-
- Just Starting Out
- Posts: 6
- Joined: Mon Sep 05, 2016 3:57 pm
- Boat Name: MAGIC
Re: Patchett engine
Wesley, Not going to make the B&W this year. MAGIC Needs a new boiler and I'm trying to get a boat done for another gentleman. Almost done with it. Then new boiler for MAGIC.
- TahoeSteam
- Full Steam Ahead
- Posts: 813
- Joined: Fri Mar 07, 2014 5:38 am
- Boat Name: Wayward Belle
- Location: South Lake Tahoe, CA, USA
- Contact:
Re: Patchett engine
Sorry to hear that. I look forward to seeing and hearing more about the projects you're working on.
Do you have any pictures of the larger Fitz Henry and Patchett compounds? (pictures can be loaded onto 3rd party photo hosting site like flickr or photobucket)
Do you have any pictures of the larger Fitz Henry and Patchett compounds? (pictures can be loaded onto 3rd party photo hosting site like flickr or photobucket)
~Wesley Harcourt~
https://www.youtube.com/c/wesleyharcourtsteamandmore
https://www.youtube.com/c/wesleyharcourtsteamandmore