Vertical Double Acting Steam Engine
Posted: Mon Jun 26, 2017 9:49 am
Newly build model of vertical double acting steam engine. Approx. 17" height with a 9.5" flywheel, weights 40lbs. Bore 2.85"(72.6mm), stroke 1.95"(50mm). Max 600rpm. Loose eccentric for easy reversing and low friction motion with securing brass nut. Unique copper "central" wick oiling system. Made by myself from the very beginning - design, calculations, patterns, dense aluminium and bronze castings. All working surfaces made from steel and bronze. Honed cast iron cylinder lining. Ground crankshaft. Ready-to-run on air for 2 - 6bars. It was supposed to be installed in a small launch. Built by me - Ms Daniela Filová - professional engineer and machinist. Located in the Czech Republic. I can ship worldwide.
I am trying to start up my own company so here is the link to my webpage that you can see other photographs and video of running engine.
http://www.danielasteam.com
I have one finished and tested. I am willing to make minor changes on request (eg. to swap the flywheel for the one without the spokes for safer use on boat...).
I have started preparing it to be run on steam (displacement oiler, steam regulating valve...) but honestly I spent more than 1 year on the whole project without any revenue so I do not want to put any other efforts if no one will be interested...
I hope you will like it. Also I presume it will not be considered as a real business ad as this is the very beginning of my new adventure with my "products".
It has almost 2x bigger cylinder volume than Stuart 5A! Despite the "subtle" appearance of the steam engine - I originally design it for operating pressure of 10bars - so when properly oiled and used at 6bars it should be a "long runner".
Nevertheless enjoy the images.
Please do not hesitate to send me the questions - I am open to discussion!
Daniela from Danielasteam
http://www.danielasteam.com
I am trying to start up my own company so here is the link to my webpage that you can see other photographs and video of running engine.
http://www.danielasteam.com
I have one finished and tested. I am willing to make minor changes on request (eg. to swap the flywheel for the one without the spokes for safer use on boat...).
I have started preparing it to be run on steam (displacement oiler, steam regulating valve...) but honestly I spent more than 1 year on the whole project without any revenue so I do not want to put any other efforts if no one will be interested...
I hope you will like it. Also I presume it will not be considered as a real business ad as this is the very beginning of my new adventure with my "products".
It has almost 2x bigger cylinder volume than Stuart 5A! Despite the "subtle" appearance of the steam engine - I originally design it for operating pressure of 10bars - so when properly oiled and used at 6bars it should be a "long runner".
Nevertheless enjoy the images.
Please do not hesitate to send me the questions - I am open to discussion!
Daniela from Danielasteam
http://www.danielasteam.com